Have you ever had a plumbing problem that you felt you couldn’t solve on your own? Was the problem just over your head? Were you afraid of what might happen if you mess with things you don’t understand? Read on to find out how to become more confident about solving problems next time your plumbing goes wrong.
Before you start a plumbing project you should tighten all of the pipes that are easily accessible. Especially if your pipes are making a range of loud banging sounds, as this is a clear sign that there are loose pipes along the line. It is also a good idea in case there is a clog so the excess pressure released does not break a loose pipe.
Don’t be afraid to call a professional. Don’t take on jobs to save money, if you aren’t sure how to fix them. Calling a professional plumber saves you money, the experience and know-how can fix your problem sooner and with less fuss.
To avoid having your outdoor faucets freeze up in the winter, detach all hoses before the first freeze. Also, close the shutoff valve that leads to the outdoor faucets, then turn on the outdoor faucets to let any remaining water in the lines drain. Once temperatures warm up in the spring, you can reverse the process.
Make sure overflow holes are cleaned out. This can help to prevent any water damage. Overflow holes are a way to stop water from overflowing if a sink is left on by accident. If the overflow hole is clogged it will not be able to do its job.
Make sure that you disconnect all hoses outside your house when the fall season hits. This is important to reduce the chance of freezing, which can cause damage to the connecting pipes. Disconnect all of your water hoses and store them safely to put your family in the best position for the fall.
If you notice water draining into your dishwasher, check how the kitchen sink hoses are installed. This hose must lead uphill and downhill to prevent mixing water between the kitchen sink and the dishwasher.
One way to prevent pipes from freezing during the winter is to keep cabinet doors in your house that contain the pipes open. This can insure that they get adequate heat to keep warm. Make sure also, to unhook and kind of hose outside and run a little water to clear the pipes of any remaining water going outside.
If water backs up from one sink to another, it is because the lines are connected. The part of the branch line for one device might be higher than another, but most likely there is also a blockage in the branch line connecting the two devices as well. This blockage must be cleaned.
As you can see, plumbing isn’t such a scary thing, it just requires proper knowledge and instruction. Fixing your own plumbing can save a lot of money. Hopefully this article has given you at least a few of the ideas that you need, so that next time your plumbing has a problem, you can fix it yourself.